top of page
FLUX
Gas flux is a brazing flux added to flame. The gas flux is added to the special device "flux generator" and mixed with the gas (acetylene, liquefied gas, propane, etc.) flowing into the flux generator in the form of steam.When the gas flux passes through the pipeline to the torch, it will emit a bright green flame when burning. By covering the brazing parts, the flame can improve the wettability and fluidity of the filler metal, reduce the generation of pinholes and improve the strength of the weld. There is no oxidation on the metal surface of brazing area, so acid pickling can be avoided after brazing, which can improve production efficiency and reduce cost.
GAS FLUX
Specification
FLUX TANK
As the main equipment of gas flux flame brazing technology, flux generator is a kind of equipment which can add gas flux (referred to as flux) into gas (acetylene, LPG, propane, etc.) in the form of steam, instead of the trouble of adding borax manually in the process of flame brazing in the past, which greatly simplifies the brazing process. As the flux adding form of this process is uniform and continuous, the flux is fully covered to the brazing part in the torch combustion flame, which not only increases the wettability and fluidity of solder, but also reduces the generation of pores, improves the weld strength, prevents the surface of the brazing area from oxidation and blackening, and does not need acid pickling after brazing. So as to improve production efficiency and reduce production cost.
Flux Generator (Stainless)
Specification
FLUX TANK
As the main equipment of gas flux flame brazing technology, flux generator is a kind of equipment which can add gas flux (referred to as flux) into gas (acetylene, LPG, propane, etc.) in the form of steam, instead of the trouble of adding borax manually in the process of flame brazing in the past, which greatly simplifies the brazing process. As the flux adding form of this process is uniform and continuous, the flux is fully covered to the brazing part in the torch combustion flame, which not only increases the wettability and fluidity of solder, but also reduces the generation of pores, improves the weld strength, prevents the surface of the brazing area from oxidation and blackening, and does not need acid pickling after brazing. So as to improve production efficiency and reduce production cost.
Flux Generator (Carbon)
Specification
GAS SAVER
GAS SAVER XR-800
.webp)
Safety：
1. When ignition fails or torch falls, air flow is automatically cut off.
2. When the gas is shut off, first gas and then oxygen will be turned off automatically, flashback probability is reduced.
3. The air inlet end is equipped with a filter to prevent the fixed particles from entering the solenoid valve, reduce the sealing and leakage rate and ensure safety.
4. Hidden design of electric wire and solenoid valve to avoid accidental fire and ensure safety.
5. The on-off indicator light of the solenoid valve is set, and the working state is visually displayed.
6. Closed flame hood design to prevent operators from electric shock.
Simple operation
With only one power switch and one flame detection switch on the operation panel.
Energy saving, environment-friendly
The design of low power consumption and frequent use of brazing torch can effectively reduce the invalid burning time of brazing torch.
Diagram of usage
bottom of page